Trace elements concentrations in soil contaminate corn in the vicinity of a cement-manufacturing plant: potential health implications.

BACKGROUND: Cultivated lands in the vicinity of industry are vulnerable due to trace element releases from industrial activities. One such situation concerns the surrounding of the largest cement-manufacturing plant in sub-Saharan Africa, located in Obajana, Nigeria. OBJECTIVE: This study aimed at examining the trace element concentrations in the soil as they contaminate corn crops in the vicinity of a cement manufacturing plant. A case study of the cement-manufacturing plant located in Obajana, Nigeria is presented. METHODS: We used inductively coupled plasma-mass spectrometer to analyse for total arsenic (As), cadmium (Cd), chromium(Cr), copper (Cu), lead (Pb), and nickel (Ni) concentrations and microwave-induced plasma-atomic emission spectrometer to measure total iron (Fe) and zinc (Zn) contents in 89 samples of corn and surface soil (0-15 cm) from five farmlands including reference farmland and evaluated health hazard of human exposure to the trace elements via the consumption of corn cultivated in the area. RESULTS: The results showed the average Cr concentrations in µg/g dry weight (±standard error of the mean) in corn ranged from 2.08 ± 0.17 to 3.56 ± 0.65 in all the farmlands including control, while the mean Pb levels in µg/g dry weight (± standard error of the mean) in corn extended from 0.23 ± 0.03 to 0.38 ± 0.02 in the farmlands downwind of the cement plant. The Cr values were several factors higher than the stable concentration range of 0.01 to 0.41 µg/g reported in cereal grains, while the Pb values exceeded the limit of 0.2 µg/g set by the Food and Agriculture Organization of the United Nations/World Health Organization in grains. Lead is a trace element of environmental concern and its average levels in the farmlands downwind of the plant were found to be several orders of magnitude higher than the values in µg/g dry weight (± standard error of the mean) (0.01 ± 0.00 to 0.02 ± 0.00) observed in the farmlands upwind of the plant and were statistically significant (p < 0.0001). IMPACT STATEMENT: Our findings provide the first health hazard assessment from the consumption of corn cultivated in the vicinity of the largest cement-manufacturing plant in Nigeria as far as we know.

EOF and target PFAS analysis in surface waters affected by sewage treatment effluents in Berlin, Germany.

Per- and polyfluoroalkyl substances (PFAS) are emerging organic pollutants and can occur in surface and groundwater. To identify the degree of pollution in surface water with PFAS, often targeted HPLC-ESI-MS/MS has been employed in which commonly 30-40 compounds are analyzed. However, other PFAS and organofluorines remain undetected. We sampled surface water of the river Spree and the Teltow Canal in Berlin, Germany, which are affected by the effluent discharge of wastewater treatment plants. Here, we employed high-resolution continuum source graphite furnace molecular absorption spectrometry (HR-CS-GFMAS) for measuring extractable organofluorines (EOF) and compared in a mass balance approach the total fluorine to the identified and quantified PFAS from the targeted analysis. The analysis highlights that the EOF are in the range expected for an urban river system (Winchell et al. in Sci Total Environ 774, 2021). However, downstream of an effluent discharge, the EOF increased by one order of magnitude, e.g., 40.3 to 574 ng F L-1, along the Teltow Canal. From our target analytes, mostly short-chained perfluorinated carboxylic acids and sulfonates occur in the water, which however makes up less than 10% of the EOF. The increase in EOF in the Teltow Canal correlates well with the increase of perfluorohexanoic acid (PFHxA), indicating that PFHxA is characteristic for the discharged EOF but not responsible for the increase. Hence, it points to PFHxA precursor discharge. The study highlights that EOF screening using HR-CS-GFMAS is necessary to identify the full scale of pollution with regard to PFAS and other organofluorines such as pharmaceutical compounds from the effluent of WWTPs.

Mercury speciation in Scottish raptors reveals high proportions of inorganic mercury in Scottish golden eagles (Aquila chrysaetos): Potential occurrence of mercury selenide nanoparticles.

Knowledge of the uptake and fate of mercury (Hg) compounds in biota is important in understanding the global cycling of Hg and its transfer pathways through food chains. In this study, we analysed total mercury (T-Hg) and methylmercury (MeHg) concentrations in 117 livers of Scottish birds of prey that were found across Scotland and submitted for post-mortem examination through the Raptor Health Scotland project between 2009 and 2019. Statistical comparisons focussed on six species (barn owl, Tyto alba; Eurasian common buzzard, Buteo buteo; golden eagle, Aquila chrysaetos; hen harrier, Circus cyaneus; Eurasian sparrowhawk, Accipiter nisus; and tawny owl, Strix aluco) and showed that golden eagles had a statistically lower fraction of MeHg compared to other raptor species. Further investigation using stable carbon and stable nitrogen isotope ratio measurements carried out for the golden eagles (n = 15) indicated that the increased presence of inorganic mercury (iHg) correlated with a marine influence on the primarily terrestrial diet. Additional bioimaging (n = 1) with laser ablation - inductively coupled plasma - mass spectrometry indicated the co-location of Hg and selenium (Se) within the liver tissue and transmission electron microscopy showed evidence of nanoparticles within the range of 10-20 nm. Further analysis using single particle - inductively coupled plasma - mass spectrometry (n = 4) confirmed the presence of Hg nanoparticles. Together, the evidence suggests the presence of mercury selenide (HgSe) nanoparticles in the liver of some golden eagles that, to our knowledge, has never been directly observed in terrestrial birds of prey. This study points to two alternative hypotheses: these golden eagles may be efficient at breaking down MeHg and form HgSe nanoparticles as a detoxification mechanism (as previously observed in cetaceans), or some golden eagles with elevated iHg may have accumulated these nanoparticles by foraging on stranded cetaceans or seabirds.

Wild shrimp have an order of magnitude higher arsenic concentrations than farmed shrimp from Brazil illustrating the need for a regulation based on inorganic arsenic.

BACKGROUND: Shrimp is a worldwide food commodity, it is a source of several nutrients and vitamins; however, this food is one of the major sources of arsenic for humans. Legislation around the world set limits for the concentration of this element in crustaceans but is mainly concerned with total analysis. Although, arsenic species have different toxicities and total analysis could be ineffective for making decisions about food security. METHODS: Samples of wild (Farfantepenaeus brasiliensis) and farmed shrimps (Litopenaeus vannamei) from NE Brazil were fractionated in subsamples of carapace, muscle tissue and viscera. The whole shrimp as well as the animal tissue fractions were decomposed using microwave digestion and total arsenic was analyzed by mass spectrometry inductively coupled plasm (ICP-MS). The water-soluble arsenic species were extracted, and the extract was carried for speciation analysis using HPLC-ICP-MS with an anionic and cationic column. RESULTS: Total As in wild shrimp samples exceeded Brazilian and USA food legislation by one order of magnitude, with concentrations of 11.5 ± 0.5 mg kg-1, while farmed shrimp had significantly lower total arsenic levels (0.53 ± 0.09 mg kg-1). More than 60% of the As was in the edible fraction in the wild shrimp, while in farmed shrimp this was less than 50%. The speciation analysis showed that arsenobetaine (AsB) was the predominant As form and iAs was below the Chinese legislation levels (iAs <0.50 mg kg-1) for shrimp in both species. CONCLUSION: The arsenic uptake in wild and farmed shrimp was discussed and some differences were found related to feed and salinity. About legislation, it has been concluded that most food legislations that consider only tAs are not appropriate to assess the toxicity of As in seafood. It is necessary to update the legislation of food control agencies to insert As speciation analysis in their protocols.

Development of Mercury Analysis by NanoSIMS for the Localization of Mercury-Selenium Particles in Whale Liver.

Nanoscale secondary ion mass spectrometry (NanoSIMS) is a dynamic SIMS technique, which offers high spatial resolution allowing the mapping of chemical elements at the nanometer scale combined with high sensitivity. However, SIMS for mercury analysis is a challenging issue due to the low secondary ion yield and has never been done on NanoSIMS. The introduction of an rf plasma oxygen primary ion source on NanoSIMS enabled higher lateral resolution and higher sensitivity for electropositive elements such as most metals. In this paper, for the first time, mercury analysis by NanoSIMS was developed applying the new rf plasma O- ion source. All mercury isotopes could be detected as Hg+ secondary ions and the isotopic pattern corresponded to their natural isotopic abundances. Furthermore, Hg+ detection in HgSe nanocrystals has been investigated where polyatomic interferences from selenium clusters were identified and separated by high mass resolution (ΔM/M ≥ 3200). However, in the presence of selenium a strong matrix effect was observed, decreasing the Hg+ secondary ion yield. In addition, a detection of Se+ ions was possible, too. The newly developed method was successfully applied to nanoscale localization by chemical imaging of HgSe particles accumulated in the liver tissue of sperm whale (Physeter macrocephalus). This demonstrated the applicability of NanoSIMS not only for mercury detection in surface analysis but also for mercury mapping in biological samples.

Higher zero valent iron soil amendments dosages markedly inhibit accumulation of As in Faya and Kilombero cultivars compared to Cd.

Impact of zero valent iron (Fe°) amendment on grain-yield (GY) and grain-As and Cd accumulation in rice (Oryza sativa L.) cultivars Kilombero and Faya were investigated. Rice plants were amended with Fe° dosages of 0, 3.1, 6.2, and 12.4 g Fe°/kg soil in pots in greenhouse experiments under continuous flooding water regime. GY in each treatment was determined at maturity, grain-As and Cd and arsenic species concentrations were determined using ICP-MS and HPLC tandem ICP-MS respectively. Mean GY in Faya (5.5 ± 1.0 g/plant) and Kilombero (4.2 ± 0.4 g/plant) amended with at least 6.2 g Fe°/kg soil were at least 57% and 22% respectively significantly higher (F = 11; p = 0.003) than that in controls (3.7 ± 0.6 and 3.4 ± 0.4 g/plant). For As bioaccumulation, mean grain-As concentration in Faya T2 (≤227 ± 32 µg/kg) and Kilombero (≤218 ± 25 µg/kg) amended with at least 6.2 g Fe°/kg soil in were at least 83% and 77% respectively significantly lower (F = 7; p = 0.004) than that in controls (973 ± 43 µg/kg and 1278 ± 208 µg/kg). Mean grain-Cd concentrations in Faya (10 ± 2 µg/kg) and Kilombero (13 ± 3 µg/kg) amended with corresponding Fe° dosages were at least 26% and 39% significantly lower (F = 4; p < 0.05) than that in controls (18 ± 3 and 23 ± 1 µg/kg). Results indicated that amending Kilombero with at least 6.2 g/kg Fe° effectively optimally regulated both grain-As and Cd accumulation to values lower than the European Commission's legislated maximum contaminant limits (MCL) of 200 µg/kg without negating grain yield benefits. Our results suggest that bioaccumulation of both As and Cd in rice grains may be completely circumvented by adopting cultivar-specific Fe° amendment dosage.

The use of microwave-induced plasma optical emission spectrometry for fluorine determination and its application to tea infusions.

This study presents a novel method for fluorine quantification determination by microwave-induced plasma optical emission spectrometry (MIP-OES). Due to the low temperature of this plasma, atomic emission of fluorine could not be measured, instead CaF molecular emissions were measured by using a calcium solution mixed in the spray chamber with the sample using a T-piece. Several wavelengths were studied to find the best signal to noise ratio for fluorine determination and 530.45 nm was chosen. The limit of detection for the determination of fluorine via CaF using MIP-OES was 1.1 mg L-1. A linear response was observed over two orders of magnitude (R2 = 0.998). The developed method was applied to ten tea infusion samples from the UK and Saudi Arabia. The results were not significantly different (paired Student's t-test, p = 0.97) to the results obtained using the reference method, high-resolution continuum source graphite furnace molecular absorption spectrometry (HR-GF MAS). The total fluorine in the tea infusions varied between 2.7 and 7.8 mg L-1; all of which were above the WHO recommended level of fluoride (0.8-1.5 mg L-1) in drinking water. This method can potentially be used for total fluorine determination and might be useful for fluorine speciation analysis when coupled with HPLC.

Characterisation of selenium and tellurium nanoparticles produced by Aureobasidium pullulans using a multi-method approach.

Aureobasidium pullulans was grown in liquid culture media amended with selenite and tellurite and selenium (Se) and tellurium (Te) nanoparticles (NPs) were recovered after 30 d incubation. A separation method was applied to recover and characterise Se and Te NPs by asymmetric flow field flow fractionation (AF4) with online coupling to multi-angle light scattering (MALS), ultraviolet visible spectroscopy (UV-Vis), and inductively coupled plasma mass spectrometry (ICP-MS) detectors. Additional characterisation data was obtained from transmission electron microscopy (TEM), and dynamic light scattering (DLS). Solutions of 0.2% Novachem surfactant and 10 mM phosphate buffer were compared as mobile phases to investigate optimal AF4 separation and particle recovery using Se-NP as a model sample. 88% recovery was reported for 0.2% Novachem solution, compared with 50% recovery for phosphate buffer. Different crossflow (Cflow) rates were compared to further investigate optimum separation, with recoveries of 88% and 30% for Se-NPs, and 90% and 29% for Te-NPs for 3.5 mL min-1 and 2.5 mL min-1 respectively. Zeta-potential (ZP) data suggested higher stability for NP elution in Novachem solution, with increased stability attributed to minimised NP-membrane interaction due to PEGylation. Detection with MALS showed monodisperse Se-NPs (45-90 nm) and polydisperse Te-NPs (5-65 nm).Single particle ICP-MS showed mean particle diameters of 49.7 ±â€¯2.7 nm, and 135 ±â€¯4.3 nm, and limit of size detection (LOSD) of 20 nm and 45 nm for Se-NPs and Te-NPs respectively. TEM images of Se-NPs and Te-NPs displayed a spherical morphology, with the Te-NPs showing a clustered arrangement, which suggested electrostatic attraction amongst neighbouring particles. Particle hydrodynamic diameters (dH) measured with dynamic light scattering (DLS) further suggested monodisperse Se-NPs and polydisperse Te-NPs distributions, showing good agreement with AF4-MALS for Se-NPs, but suggests that the Rg obtained from AF4-MALS for Te-NP was unreliable. The results demonstrate a complementary application of asymmetric flow field-flow fractionation (AF4), ICP-MS, light scattering, UV-Vis detection, and microscopic techniques to characterise biogenic Se and Te NPs.

The use of high resolution graphite furnace molecular absorption spectrometry (HR -MAS) for total fluorine determination in extractable organofluorines (EOF).

The determination of total fluorine content using high-resolution graphite furnace continuum source molecular absorption spectrometry (HR- MAS) has been employed in a variety of samples for over 10 years. However, most of the samples analysed by HR- MAS are rich in fluoride, with negligible levels of organic fluorinated species. With an increase in concern surrounding per- and polyfluoroalkyl substances (PFASs), new methods to measure total fluorine of organofluorine using different techniques have been developed. However, no studies focused on PFASs behaviour in HR-MAS have been performed. As these compounds encompass a wide range of different structures, boiling points, decomposition temperatures and matrix interactions, a loss of accuracy can occur when an aqueous external calibration is performed using only one compound. To overcome this issue, an investigation into permanent modifiers for the graphite furnace was performed. After optimisation similar sensitivity for different PFCA was achieved when 400 µg of W was used as a permanent modifier together with an optimised temperature program. The relative deviation between the different PFCA standard slopes relative to the PFOA slope was lower than 15%. The instrumental limit of detection and quantification (LOD and LOQ, respectively) of total fluorine as total PFCA was 0.1 mg L-1 and 0.3 mg L-1, respectively, while the method LOD and LOQ (using solid phase extraction) was 0.3 µg L-1 and 1.0 µg L-1, respectively. The developed method gave satisfactory recoveries for the spiked PFCA into seawater, river water and effluent using PFOA calibration standards. The optimised method is useful for measuring extractable organofluorines (EOF) when only ionic PFASs such as PFCA are expected. When other organofluorines are expected, the results using HR GF-MAS should be taken with caution.

Simultaneous stimulation of arsenic methylation and inhibition of cadmium bioaccumulation in rice grain using zero valent iron and alternate wetting and drying water management.

Studies aiming to limit bioaccumulation of arsenic (As) and cadmium (Cd) in rice grain has attracted global attention. In this study, simultaneous impact of zero valent iron (Fe°) and various water management regimes (continuous flooding (CF), alternate wetting and drying (AWD) and low water (LW)) on rice grain yield (GYM) and bioaccumulation of As and Cd in unpolished rice grain (URG) were investigated. Compared to respective control treatments, Fe° significantly reduced GYM under LW by 32% (p < 0.001) and significantly increased GYM under AWD by 24% (p = 0.009; F = 5.9) but had no significant effect on GYM under CF water management regime (p > 0.05). The grain harvest index was significantly higher in Fe° amended rice under AWD (67%; p < 0.001) and CF (35%; p = 0.001) compared to those without Fe° amendment. Fe° significantly reduced tAs in URG under LW by 32% (p < 0.017) and significantly increased tAs in URG under AWD by 37% (p = 0.007) but had no significant effect on tAs in URG under CF (p > 0.05). The Cd concentrations were significantly reduced by 51% (p = 0.002) and 61% (p < 0.003) in URG under LW and AWD respectively compared to the respective control treatments. The Dimethylarsinic acid (DMA) in unpolished rice (URG) under AWD (+Fe°) was significantly higher (p < 0.01; F = 11.3) compared to that accumulated in URG under AWD(-Fe°). Despite increasing As accumulation in AWD water management, simultaneous use of AWD water management and Fe° increased grain yield, enhanced accumulation of less toxic methylated As in rice grains and accumulated low Cd concentrations comparable to that attainable with CF water management indicating that simultaneous use AWD and Fe° can be effective in controlling Cd accumulation in paddies highly contaminated with Cd.

Matrix-dependent size modifications of iron oxide nanoparticles (Ferumoxytol) spiked into rat blood cells and plasma: Characterisation with TEM, AF4-UV-MALS-ICP-MS/MS and spICP-MS.

Engineered nanoparticles such as iron oxide (Fe3O4) nanoparticles (IONPs) offer several benefits in nanomedicine, notably as contrast agents in magnetic resonance imaging (MRI). Ferumoxytol, a suspension of IONPs (with a manufacturer's reported particle diameter of 27 nm-30 nm) was characterized as a standard by spiking into rat blood plasma and cell fractions. Nanoparticle separation, and characterisation was investigated with asymmetric flow field-flow fractionation (AF4) coupled online to ultraviolet-visible spectroscopy (UV-VIS), multi-angle light scattering (MALS) and inductively coupled plasma mass spectrometry (ICP-MS) detectors; also with single particle inductively coupled plasma mass spectrometry (spICP-MS) and transmission electron microscopy (TEM). MALS signal of pristine Ferumoxytol indicated radii of gyration (Rg) between 15 and 28 nm for the Fe-containing fraction and 30-75 nm for the non-Fe fraction. IONPs spiked into blood plasma indicated a polydisperse distribution between 40 nm - 120 nm suggesting matrix-induced size alterations. Spiking of the IONPs into cells showed a shift in ICP-MS Fe signal to 15 min, however the MALS signal was undetected within the Fe containing fraction of the IONPs suggesting NP loss due to membrane-particle attraction. spICP-MS analysis of IONPs spiked in rat plasma suggested the release of Fe-containing colloids into plasma causing an increase in diameter of IONPs to 52 ±â€¯0.8 nm; whereas no major variation in particle size and distribution of the IONPs spiked in cell fractions was observed (33.2 ±â€¯2.0 nm) suggesting non-alteration of the NP Fe core. A complementary application of microscopic, light scattering, and mass spectrometry techniques for the characterisation of NPs in challenging biological matrices like blood has been demonstrated.

High-precision isotopic analysis sheds new light on mercury metabolism in long-finned pilot whales (Globicephala melas).

Whales accumulate mercury (Hg), but do not seem to show immediate evidence of toxic effects. Analysis of different tissues (liver, kidney, muscle) and biofluids (blood, milk) from a pod of stranded long-finned pilot whales (Globicephala melas) showed accumulation of Hg as a function of age, with a significant decrease in the MeHg fraction. Isotopic analysis revealed remarkable differences between juvenile and adult whales. During the first period of life, Hg in the liver became isotopically lighter (δ202Hg decreased) with a strongly decreasing methylmercury (MeHg) fraction. We suggest this is due to preferential demethylation of MeHg with the lighter Hg isotopes and transport of MeHg to less sensitive organs, such as the muscles. Also changes in diet, with high MeHg intake in utero and during lactation, followed by increasing consumption of solid food contribute to this behavior. Interestingly, this trend in δ202Hg is reversed for livers of adult whales (increasing δ202Hg value), accompanied by a progressive decrease of δ202Hg in muscle at older ages. These total Hg (THg) isotopic trends suggest changes in the Hg metabolism of the long-finned pilot whales, development of (a) detoxification mechanism(s) (e.g., though the formation of HgSe particles), and Hg redistribution across the different organs.

Novel non-targeted analysis of perfluorinated compounds using fluorine-specific detection regardless of their ionisability (HPLC-ICPMS/MS-ESI-MS).

Although perfluorooctanesulfonic acid (PFOS) and perfluorooctanoic acid (PFOA) have been phased out, there is a plethora of per- or polyfluoroalkyl substances (PFAS) generated and only a small number of these compounds are currently being monitored in environmental and biological sample using molecular mass spectrometry (MS). Total fluorine determination has revealed that a substantial amount of fluorinated organic compounds has not been identified. Due to the small mass deficiency of fluorine, it is not an easy task to screen successfully all fluorinated compounds including those which are not easy ionisable, hence a novel fluorine-specific detector is needed. Here, inductively-coupled plasma mass spectrometry (ICPMS) was used for the first time for the detection of PFAS, by using the novel approach to transfer F- into a detectable [BaF]+ in the argon plasma. A reverse phase-high performance liquid chromatography (RP-HPLC) method was developed and then online coupled to ICPMS/MS for the fluorine-specific detection and simultaneously to electrospray MS (ESI-MS) to separate perfluorinated carboxylic acids (PFCA) and perfluorooctanesulfonic acid (PFOS). The calibration was linear and was element-specific with detection limits of 0.49 mg F L-1 under gradient elution method. As a proof of concept, PFCA standards in methanol were not fully neutralised to force the esterification and those solutions were measured using HPLC-ICPMS/MS-ESI-MS. The methyl esters were not detectable by ESI-MS but by ICPMS/MS. This illustrates that the undetectable fluorine-containing compounds were detected and quantified by the element-specific detection of ICPMS/MS. The analysis of spiked river water at sub-ppb level gave an acceptable recovery using a SPE-based preconcentration method. Since ICPMS/MS method is an element-specific detection, all non-fluorinated compounds interfering in ESI-MS were eliminated. Hence, HPLC-ICPMS/MS can be used as a non-targeted method of fluorinated compounds which helps the identification of novel fluorinated compounds in environmental and biological samples and helps with mining the ESI-MS data.

AF4-UV-MALS-ICP-MS/MS, spICP-MS, and STEM-EDX for the Characterization of Metal-Containing Nanoparticles in Gas Condensates from Petroleum Hydrocarbon Samples.

The coupling of flow field flow fractionation (FlFFF) with ICP-MS/MS for the fractionation and analysis of natural nanoparticles (NPs) in environmental samples is becoming more popular. However, the applicability of this technique to nonaqueous samples, such as gas condensates from petroleum hydrocarbon samples, has not been reported yet. In this study, an asymmetric flow-field flow fractionation (AF4) system coupled with UV and MALS detectors has been optimized to perform the fractionation of natural NPs present in a gas condensate sample, using THF as the carrier liquid. Prior to this, STEM images indicated the presence of both large (200 nm and more) and smaller (50 nm and less) particles, whose irregular shape is probably due to agglomeration. AF4-UV-MALS-ICP-MS/MS confirmed the presence of various NPs and colloids, some containing aromatic compounds as well as various metals, including Hg. The recovery against an injection without crossflow is around 75% for most metals. The presence of Hg-containing NPs was confirmed with offline single particle ICP-MS (spICP-MS), using THF as a solvent. These NPs were identified as HgS using STEM-EDX. These results highlight, for the first time, that particulate matter may contaminate gas condensates with a series of elements (Al, P, S, Ti, V, Mn, Fe, Co, Cu, Zn, As, Se, Cd, Hg, and Pb), which can make the upstream use problematic, especially for mercury.

Metallomics Study in Plants Exposed to Arsenic, Mercury, Selenium and Sulphur.

This chapter is focussing on the interaction of arsenic, mercury and selenium with plans. Aspects of biotransformations are discussed, before the analytical methodologies are listed and critically appraised in the second part. A holistic view is given, starting from the soil environment and continuing to the plant roots and the translocations into the upper part of the plants. Under different soil conditions, different kinds of elemental species are identified, which have an impact on how the elemental species are taken up by the plant. The uptake mechanisms of these elemental species are explained and compared before the biotransformation reactions of all elemental species in the plant root; their transport into the vacuoles and translocation to the leaves and grains are discussed. Here in particular the interaction with sulphur-rich phytochelatins is described for all three elemental species. Since the sulphur chemistry is so important for the uptake, bioaccumulation and translocation of the metals and metalloids, a subchapter about sulphur chemistry in plants has been added. All aspects of biotransformation dealt with in this chapter is finally rounded up by a thorough description of the analytical methodology given with a focus on the use of HPLC-ICPMS/ESI-MS for both quantitative and molecular analysis.

Comparison of on-site field measured inorganic arsenic in rice with laboratory measurements using a field deployable method: Method validation.

A commercial arsenic field kit designed to measure inorganic arsenic (iAs) in water was modified into a field deployable method (FDM) to measure iAs in rice. While the method has been validated to give precise and accurate results in the laboratory, its on-site field performance has not been evaluated. This study was designed to test the method on-site in Malawi in order to evaluate its accuracy and precision in determination of iAs on-site by comparing with a validated reference method and giving original data on inorganic arsenic in Malawian rice and rice-based products. The method was validated by using the established laboratory-based HPLC-ICPMS. Statistical tests indicated there were no significant differences between on-site and laboratory iAs measurements determined using the FDM (p = 0.263, ά = 0.05) and between on-site measurements and measurements determined using HPLC-ICP-MS (p = 0.299, ά = 0.05). This method allows quick (within 1 h) and efficient screening of rice containing iAs concentrations on-site.

Reactive gaseous mercury is generated from chloralkali factories resulting in extreme concentrations of mercury in hair of workers.

Occupational exposure of chloralkali workers to highly concentrated mercury (Hg) vapour has been linked to an increased risk of renal dysfunction and behavioural changes. It is generally believed that these workers are exposed to elemental Hg, which is used in abundance during the production process however, the lack in analytical techniques that would allow for identification of gaseous Hg species poses a challenge, which needs to be addressed in order to reach a consensus. Here, we present the results from simulated exposure studies, which provide sound evidence of higher adsorption rate of HgCl2 than Hg0 and its irreversible bonding on the surface of hair. We found that chloralkali workers were exposed to HgCl2, which accumulated in extremely high concentrations on the hair surface, more than 1,000 times higher than expected from unexposed subjects and was positively correlated with Hg levels in the finger- and toenails.

Importance of ICPMS for speciation analysis is changing: future trends for targeted and non-targeted element speciation analysis.

This article is aimed at researchers interested in organic molecules which contain a heteroatom but who have never considered using inductively coupled plasma mass spectrometry (ICPMS) or who have used ICPMS for years and developed numerous methods for analysis of target elemental species. We try to illustrate (1) that ICPMS has been very useful for speciation analysis of metal(loid) target species and that there is now a trend to replace the costly detector with cheaper detection systems for routine target analysis, and (2) that ICPMS has been used and will be used even more in the future for non-targeted analysis of elements which are not normally associated with ICPMS analysis, such as non-metals such as sulfur, phosphorus, chlorine and fluorine. Graphical Abstract Starting with HPLC-ICPMS for non-targeted analysis of heteroatom containing molecules, once target molecule is identified alternative detectors can be used for routine measurements.

A field deployable method for a rapid screening analysis of inorganic arsenic in seaweed.

Inorganic arsenic (iAs) in 13 store-bought edible seaweed samples and 34 dried kelp (Laminaria digitata) samples was determined by a newly developed, field-deployable method (FDM) with the aid of a field test kit for arsenic in water. Results from the FDM were compared to results from speciation analysis achieved by using high performance liquid chromatography coupled to inductively coupled plasma mass spectrometry (HPLC-ICP-MS). The FDM consisted of a simple extraction method using diluted HNO3 to quantitatively extract iAs without decomposing the organoarsenicals to iAs followed by the selective volatilisation of iAs as arsine (AsH3) and subsequent chemo-trapping on a filter paper soaked in mercury bromide (HgBr2) solution. Method optimization with a sub-set of samples showed 80-94% iAs recovery with the FDM with no matrix effect from organo-arsenic species in the form of dimethylarsinic acid (DMA) on the iAs concentration. The method displayed good reproducibility with an average error of ±19% and validation by HPLC-ICP-MS showed that the results from the FDM were comparable (slope = 1.03, R2 = 0.70) to those from speciation analysis with no bias. The FDM can be conducted within an hour and the observed limit of quantification was around 0.05 mg kg-1 (dry weight). This method is well suited for on-site monitoring of iAs in seaweed before it is harvested and can thus be recommended for use as a screening method for iAs in seaweed. Graphical abstractScreening seaweed for their inorganic arsenic concentration within one hour without bias has been made possible in the field by using a field deployable arsenic kit. Its accuracy and precision was compared to HPLC-ICPMS.

Methylmercury varies more than one order of magnitude in commercial European rice.

Rice is known to accumulate methylmercury (MeHg) in the rice grains. MeHg as a neurotoxin impacts on the human central nervous systems and especially on the developing brain. In this exploratory study, 87 commercial rice products sold in Europe, including nine baby-rice products, were analyzed for total Hg and MeHg content. MeHg concentration in all rice products investigated range from 0.11 to 6.45µgkg(-1) with an average value of 1.91±1.07µgkg(-1) and baby-rice is not significantly different from other rice products. Total Hg ranges from 0.53 to 11.1µgkg(-1) with an average of 3.04±2.07µgkg(-1). MeHg concentrations in all rice products studied in this work would not exceed the provisional tolerable weekly intake (PTWI). 30% of all commercial market rice products exceeded 10% of the PTWI calculated for toddlers or 13% of products for adults with rice based diet.